This conversion has safety notches cut between each chamber to use when carrying cylinder with all 5 chambers loaded. If shooting black powder ammunition the firings pins must be removed and cleaned to avoid corrosion. The cap is reinstalled by lining up the hole in the cap with the silver guide pin on top of the cylinder.
The cylinder contains 5 firing pins retained by threaded doughnuts. Reloading/loading is done by removing the barrel, cylinder, and then removing the cylinder cap from the cylinder.
45LC ammunition could be too long for the conversion cylinder if the factory does not follow standard OAL measurements. Due to the shorter frame length of these revolvers, some. This blued conversion cylinder converts steel frame Pietta 1851 & 1860 Navy & Army revolvers from.
